Payment & Shipping Terms:
|Tank Capacity:||3000L||Tank Material:||Q235|
|Tank Shape:||Elliptical Shape||Tank Material Thickness:||6mm|
|Engine Horse Power:||120hp||Drive Type:||4x2|
Foton Small 4x2 3m3 To 4m3 Sewage Suction Tanker Truck Sewage Disposal Trucks
A vacuum sewage truck is a tank truck with a heavy duty vacuum designed to pneumatically load solids, liquids, sludge or slurry through suction lines typically 2-4" in diameter with 3" being the norm. The typical pump used in the industry is the rotary vane vacuum pump. The truck can be configured to be a direct PTO/belt or a PTO/hydraulic drive system. There are two different ways to mount the pump either directly on the truck with PTO drive or on the trailer with a pony motor. Each application has different handling characteristics.
1. Time for full suction less than 5min.
2. The fecal suction pipe can rotate 360 degree.
3. Equipped with hand washing device.
4. Automatic alarm and close the cover when suction full.
(Overfill system with music horn is equipped to prevent the vacuum pump damage from fecal into
vacuum pump when the tank is full)
5. Optional high-pressure cleaning function of fecal truck.
6. RHD or LHD
7. Strong Power engine
1. Factory export department directly sale ,reliable quality
2.Export experience more than 12 years
3.Cheap / competitive price, high quality ,you get more than your paid
4.With CCC, ISO , BV approved
5. The heart of the service, rational design
|Chassis specific||Drive type||4×2|
|Steering||Two spoke steering wheel, recirculating ball type steering gear|
|Gear box||5 forward speed,1 reserve speed,Mechanical transmission, flexible shaft drawing type control|
|Clutch||Single ,dry diaphragm spring clutch|
|Cabin||Flat cabin and can flip|
|Leaf spring (front/rear)||8/9+5,6/8+4|
|Air condition||According with customer|
|Sewage suction system||Sewage suction pump||Single stage rotary vane oil seal vacuum pump|
|Special equipemnt||Vertical suction lift||≥8|
|Absolute working pressure||8500Pa|
|Theoretical pumping speed||98L/S|
|Input and output diameter||50mm|
|Filling time||less than 5s|
|upper body specification:|
|Super Tank: Head and the tank made by a molding, thickening, anti-high-pressure.|
|Sub frame: Full sub-frame with flexible mounting fixed to the truck chassis by horse bolts. Sub-frame and chassis medium with wooden plates.|
|Vacuum System: Liquid ring vacuum pump, is driven from the PTO on the gearbox, provides high airflows along with high vacuum levels for removing debris above or below liquid surfaces.|
|Tank Mounting: The truck will be equipped at our expense with a sub frame according to truck manufacturer’s prescriptions.|
|Painting: All steel parts are sand blasted before painting. One anti-corrosion and zinc-rich primer and final painting at customer’s choice of colour.All steel parts are steel blasted before painting. Paint markers according to customer’s demand.|
|Suitable for the transport of non-hazardous waste products and built according to the design rules for vacuum operated waste tankers.|
Contact Person: Nicole